QUICK GUIDE TO LIGHTING INS­­PECTION

Introduction

It is necessary to monitor the lights and do routine maintenance on them. Proper lighting may not only help attract consumers, but it may also contribute to your property’s safety and create an inviting environment.

If you don’t perform routine maintenance on your lighting equipment, you could endanger people’s lives. It is essential to take measures to avoid causing damage to the infrastructure used for lighting, whether it be exterior/interior lighting systems, business lighting systems, transit lighting systems, or athletic field lighting systems. It is necessary to keep everyone who uses the infrastructure safe. Installing a thermostat with a high-efficiency rating will help you cut costs, minimize the possibility of breakdowns, and maximize the amount of money you save.

In this blog, we present a quick guide to lighting inspection.

Lighting inspection is necessary!

Just imagine that one of your customers bought an LED lamp from your store. In terms of the product’s design and packaging, they have no issues. And they can’t wait to do it in the comfort of their own home!

A severe electric shock occurs while the light is put on the customer’s property. Your company’s good name and future opportunities are put at risk very quickly when a lawsuit is filed.

Before shipping out your items, undertake a lighting inspection and extensive lighting testing on-site to ensure their safety and functionality. Verifying your lighting’s compliance with LED lighting safety norms and international law is another benefit of conducting tests on your equipment.

Steps for Lighting Inspection

Here are the steps that you need to perform for lighting inspection:

Replace any burned-out lights: It is advised that the entire set of lights be replaced if even one goes out. It will help in maintaining lighting quality. Group replacement of light bulbs might be an ideal and time-saving solution to any future light problems because they have a limited shelf life. To ensure that all lights are working correctly, inspect them one by one.

Inspect lighting cables:  The next step is to ensure that all of your external lights are working and that the wires going to the lights are in good condition. See if there is sealant on outside light fixtures to ensure the cables are protected from the elements.

Make sure your lights are all the same color:  If your lights aren’t all the same color, it could mean that one of them is nearing the end of its life. In this case, group replacement should be considered.

Perform A Visual Check: Adjustable lights can be redirected because of weather conditions, wear and tear, and human causes. As a result, you may see a considerable drop in the amount of light. Be sure to perform a visual check that includes lighting that can be adjusted.

Perform a thorough dust search: Dust can shorten the lamp’s life and reduce its brightness. Ensure that the lamps and their fittings are regularly dusted and cleaned throughout your inspection, and verify that the lights are pointed in the direction you intend them to be.

Keep an eye on the battery life: Replacing the batteries in all lighting fixtures is unnecessary, but some do. Consequently, it would help if you kept an eye on the battery life of these devices.

Don’t forget compatibility: Make sure you know what kind of lamps you have and what they could require. Electrical ballasts are required for most fluorescent lights.

Tests for Lighting Inspection

Some necessary lighting inspection tests are:

LED Product Assembly Test

An LED light bulb often includes a lamp holder or mounting bracket.

If your product is easy for customers to assemble, install, and use, an on-site assembly check can help.

To ensure that the product is assembled correctly, an inspector will use standard tools or tools included with the product when purchased. This test aims to simulate the actual assembly and installation process your customer will go through.

A minimum sample size of at least two units is advised for this test. It’s best to use a bigger sample size if construction involves more than two simple stages.

Lighting Components’ Torque Test

Torque testing is standard for products with rotating elements, such as screws, fasteners, or bolts. The screw base of a light bulb, for example, must be placed into the lamp holder when installing a light bulb.

To determine if these parts are defective, you can use the torque test to measure the rotational force required to turn, open, or close them. A too high torque, for example, could stretch and weaken a component. It’s also possible that an element will come loose if the torque is too low.

A specialized piece of equipment torque tester is required to perform this test. Typically, your provider will supply the torque tester that the inspector will need. Because of its size, this piece of equipment cannot be brought to the inspection site by the vast majority of inspectors.

Lighting Endurance Test

lighting devices can resist regular use, as they are frequently used throughout the day. Under normal operating conditions, it is the responsibility of lighting importers to ensure that their products do not overheat or explode.

During an endurance test, also known as a running test, your lighting equipment is put through its paces. The inspector must ensure the light is on and running at full brightness for 4 hours. During this phase, quality control professionals monitor the product’s performance regularly for any malfunction.

Integrating Sphere and Lighting Source Test

The integrating sphere test takes the standard measurements of the lighting source. To do this test, you’ll need an integrating sphere, a spectroradiometer, and software to correct the spectral mismatch. The equipment and software required for producing LED lighting should already be readily available on the premises of most lighting manufacturers.

The inspector then inserts the LED light into the integrating sphere and analyses the results on the computer with the corresponding software. It is recommended that the sample size for this test be at least three different units.

Conclusion

Every lighting evaluation should go the extra mile to get the most accurate results. With title24lightinginspection.com, you can ensure that your lights are safe and meet your performance standards. Title 24 professionals conduct inspections to ensure that all construction plans are in accordance with the installations.

Consider replacing any lighting that isn’t operating correctly. Relamping all of your lights at once is a good idea when yours start to go out. Please plan for relamping by determining how much time each lamp spends each week or month and how long it is expected to be helpful.

Provide your QC team and suppliers with a quality control checklist that contains all applicable inspection criteria. A complete lighting inspection checklist should always include testing methodology, sample sizes, testing equipment, and who should supply that equipment.

Correctly executed lighting testing can be a powerful weapon in the fight for optimal performance and safety in a building’s lighting system.